7一种双S形进气道流场特性殛控制的试验研究

In order to provide the line of-sight blockage of the engine face for an advanced Uninhabited Combat Air Vehicle(UCAV), a highly curved serpentine inlet is proposed and experimentally studied. Based on the static pressure distribut ion measurement along the wall, the flow separation is found at the top wall of the second S duct for the baseline inlet design, which yields a high flow distortion at the exit plane. To improve the flow uniformity, a single array of vortex generators (VGs) is employed within the inlet. In this experimental study, the effects of mass flow ratio, free stream Mach number, angle of attack and yaw on the performance of a serpentine inlet instrumented with VGs are obtained. Results indicate: (1) Compared with the baseline serpentine design without flow control the application of the VGs promotes the mixing of core flow and the low momentum flow in the boundary layer and thus prevents the flow separation. Under the design condition, the exit flow distortion (

) decreases from 11. 7% to 2.3% by using the VGs. (2) With the descent of the free stream Mach number the total pressure loss decreases. How ever, the circular total pressure distortion increases. When the angle of attack rises from - 4° to 8°, the total pressure recovery and the circular total pressure distortion both go down. In addition, with the increase of yaw the total pressure recovery is fairly constant, while the circular total pressure distortion ascends gradually. (3) When Ma₀=0.6-0.8, α= −4°-8° and β= 0°-6°, the total pressure recovery varies between 0.936 and 0.961, the circular total pressure distortion coefficient varies between 1.4% and 5.4% and the synthesis distortion coefficient has a ranges from 3.8% to 7.0%. The experimental results confirm the excellent performance of the newly designed serpentine inlet incorporating VGs.     

离心力场中TiC/FeNiCr复合材料 涂层的原位反应合成

以Fe₂O₃,Cr₂O₃,CrO₃,NiO,Al,Ti粉和C粉为原料,在离心力场中在碳钢基体表面原位反应合成了TiC-FeNiCr复合材料涂层.利用X射线衍射、金相照相、扫描电镜、X射线能谱分析等手段对涂层的显微结构和组织形貌进行了研究.测试了涂层的显微硬度及干滑动磨损条件下的耐磨性能.结果表明,涂层和碳钢基体能形成冶金结合.涂层由FeNiCr奥氏体和其中弥散分布的TiC硬质相组成.TiC颗粒晶粒尺寸小于3μm,形状呈多边形或花瓣状.涂层显微硬度约为Hv 500~Hv 800,TiC含量增加,涂层的显微硬度提高.涂层较碳钢具有优异的耐磨性能.      

三芳基均三氮杂苯环（TSTR）耐高温树脂的研究

从制备最主要的原材料入手,研究了ＴＳＴＲ树脂的合成,并对树脂进行了红外光谱分析（ＩＲ）以及差示扫描量热法（ＤＳＣ）和热重量分析法（ＴＧＡ）等热分析,其中４－氰基苯酐的一步合成法已申请了国家专利。试验结果表明：该树脂的最高工作温度可达４００℃,接近美国先进的ＰＭＲ－Ⅱ－５０ 高温树脂的工作温度。     

DDS中相位截断效应分析及其改善方法

分析了在直接数字频率合成（ＤＤＳ）中引起杂散的相位截断效应,针对其引起的杂散特点讨论了一种通过加入伪随机数改善杂散谱分布的方法,并通过计算机仿真进行了验证。     

航天发射特征事件综合和弹道融合策略优化研究与应用

特征事件综合和弹道融合是航天发射过程中最为重要的一项工作,通过特征事件发生时间和火箭飞行弹道可直观地反映出运载火箭的飞行状态。因此,为了进一步提高特征事件综合和弹道融合效果,基于遥、外测量信息,分别对参与特征事件综合和弹道融合的信息源进行分类及其影响因素进行分析,并提出了相应的信息融合策略。通过采用优化的融合策略,可进一步提高特征事件时间解算的准确性和实效性,提升弹道融合的效果,满足航天发射飞行态势显示和安全控制的任务需求。     

Gd2SiO5纳米粉体的并流化学共沉淀法合成

以Gd₂O₃和正硅酸乙酯(TEOS)为原材料,采用并流化学共沉淀法合成Gd₂SiO₅粉体材料。研究Gd₂SiO₅前驱体的热响应特征、Gd₂SiO₅粉体的物相组成和微观形貌,并对Gd₂SiO₅粉体的合成机理进行初步探讨。结果表明:前驱体的低Gd/Si摩尔比和反应体系的高pH值会导致Gd₂SiO₅粉体生成Gd_9.33(SiO₄)₆O₂杂质相,相反则会导致生成Gd2O3杂质相。当Gd/Si摩尔比为20∶11、pH值为9~10、合成温度为1000~1300℃时,合成的粉体纯度较高,Gd₂SiO₅颗粒呈不规则形貌特征,平均粒度为100~200 nm。Gd₂SiO₅合成过程中,前驱体以一种—[Si—O—Gd]—网络结构存在,在煅烧过程中逐渐转化为Gd₂SiO₅晶体以及Gd_9.33(SiO₄)₆O₂和Gd₂O₃杂相。     

Nonlinear aeroelastic analysis of the folding fin with freeplay under thermal environment

The nonlinear aeroelastic behavior of a folding fin in supersonic flow is investigated in this paper. The finite element model of the fin is established and the deployable hinges are represented by three torsion springs with the freeplay nonlinearity. The aerodynamic grid point is assumed to be at the center of each aerodynamic box for simplicity. The aerodynamic governing equation is given by using the infinite plate spline method and the modified linear piston theory. An improved fixed-interface modal synthesis method, which can reduce the rigid connections at the interface, is developed to save the problem size and computation time. The uniform temperature field is applied to create the thermal environment. For the linear flutter analyses, the flutter speed increases first and then decreases with the rise of the hinge stiffness due to the change of the flutter coupling mechanism. For the nonlinear analyses, a larger freeplay angle results in a higher vibration divergent speed. Two different types of limit cycle oscillations and a multiperiodic motion are observed in the wide range of airspeed under the linear flutter boundary. The linear flutter speed shows a slight descend in the thermal environment, but the effect of the temperature on the vibration divergent speed is different under different hinge stiffnesses when there exists freeplay.     

航天器柔性太阳翼最优PPF主动振动抑制方法

针对采用可变速控制力矩陀螺(VSCMG)进行柔性太阳翼振动抑制问题，提出一种基于求解非光滑 H∞ 综合问题的最优参数正位置反馈(PPF)控制方法。首先，建立考虑VSCMG和柔性太阳翼耦合的振动模型，得到了线性化的约束陀螺柔性板动力学模型，基于同位控制思想推导了以角度陀螺为测量装置的约束陀螺柔性板全阶状态空间模型。针对被控对象特性，确定最优PPF控制器的结构构型和待优化参数。进而，通过对约束陀螺柔性板全阶状态空间模型进行降阶、修正和加权处理，将PPF控制器参数优化问题转化为在PPF控制器构型约束条件下的非光滑H∞综合问题，并应用一阶下降算法进行寻优求解，实现最优PPF控制器的设计。该方法能够实现对各阶陀螺模态的独立控制，在保证快速性和鲁棒性的前提下，实现最优PPF参数的稳定高效求解。仿真结果表明，所提出的最优PPF控制方法能够快速、鲁棒地实现航天器柔性太阳翼的主动振动抑制。     

语音合成遥控指令回报系统

本文介绍了用于无人机的语音合成回报系统,代替传统的信号盘灯光显示,向地面指挥监测人员回报遥控指令接收情况。语音合成系统由基于LPC原理制成的单片语音合成处理器TMS5220组成,用Z-80 CPU实现控制。系统结构简单,通用性强,合成语音清晰、自然可懂。     

一种四连杆机构位置综合的迭代方法

本文提出了一种四连杆机构位置综合的迭代方法,解决了一般解析法对初始点要求过高的问题。该方法对初始点要求很低,而且在计算机上也不易出现“溢出”。